Re: Ns-users Digest, Vol 30, Issue 26

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Ns-users Digest, Vol 30, Issue 26

s. gazal

hi everybody,
I'm searching ns-2 simulation models of the IEEE 802.16 mac and phy layers
may you  help me please ?
sahar






>From: [hidden email]
>Reply-To: [hidden email]
>To: [hidden email]
>Subject: Ns-users Digest, Vol 30, Issue 26
>Date: Sun, 25 Jun 2006 17:00:03 -0700
>
>Send Ns-users mailing list submissions to
> [hidden email]
>
>To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.isi.edu/mailman/listinfo/ns-users
>or, via email, send a message with subject or body 'help' to
> [hidden email]
>
>You can reach the person managing the list at
> [hidden email]
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Ns-users digest..."
>
>
>Today's Topics:
>
>    1. Neighborhood Discovery protocol implementation???? (. Melvin John)
>    2. Re: setting the radio and sensing ranges of a sensor node
>       (Miguel Sepulcre)
>    3. 3G/802.11 node (Bayani Carbone)
>    4. Re: setting the radio and sensing ranges of a sensor node
>       (Andrea M)
>    5. GEA w/ ns_2.29-2 Build Problems (Jeff Schwentner)
>    6. ns-allinone-2.1b9a - error in ./configure: line 5718 -
>       tcl8.3.2 configuration failed... (Wasiq Nadeem)
>    7. Changing node configurations for wireless networks.
>       (Mohammad Zubair Ahmad)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Sun, 25 Jun 2006 16:59:10 +0930
>From: ". Melvin John" <[hidden email]>
>Subject: [ns] Neighborhood Discovery protocol implementation????
>To: [hidden email]
>Message-ID: <[hidden email]>
>Content-Type: text/plain; charset=ISO-8859-1
>
>hi ns-users,
>
>Is the neighborhood discovery protocol (NDP) implemented in NS2 ? I am
>asking
>because the ns manual says that we can track neighbors of a node. I am
>implementing a hybrid routing protocol for MANETS in NS2 and was wondering
>if i
>have to implement the NDP protocol or its already implemented and i can use
>it.
>
>cheers,
>Melvin
>
>
>
>------------------------------
>
>Message: 2
>Date: Sun, 25 Jun 2006 10:26:38 +0200
>From: "Miguel Sepulcre" <[hidden email]>
>Subject: Re: [ns] setting the radio and sensing ranges of a sensor
> node
>To: "Alper BEREKETLI" <[hidden email]>, <[hidden email]>
>Message-ID: <001201c69831$155b9220$0501a8c0@portatil>
>Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
>The basic procedure to 'set' the communication range is detailed in the ns
>manual: http://www.isi.edu/nsnam/ns/doc/node221.html (an example can be
>found here http://140.116.72.80/~smallko/ns2/range_en.htm).
>
>The sensing range can be similarly adjusted with:
>Phy/WirelessPhy set CSThresh_ <value>Hope this helps
>
>Regards
>
>Miguel
>
>
>
>
>
>
>----- Original Message -----
>From: "Alper BEREKETLI" <[hidden email]>
>To: <[hidden email]>
>Sent: Saturday, June 24, 2006 5:15 PM
>Subject: [ns] setting the radio and sensing ranges of a sensor node
>
>
> >
> > Hi all,
> >
> > I am performing some simulations on wireless sensor networks and would
> > like to know how I can set and use the "radio communication" and
> > "sensing" ranges of a sensor node... Where can I find the sensing
> > range of a wireless node so that I can calculate the coverage of an
> > event region?
> >
> > I would appreciate any help. Thanks in advance.
> >
> >
> > Alper BEREKETLI
> > Research & Teaching Assistant
> > Middle East Technical University
> > Department of Electrical and Electronics Engineering
> > E-Mail: [hidden email], [hidden email]
> > Office: EA404, Phone: (+90 312) 210 44 25
> > Lab: D123, Phone: (+90 312) 210 45 74
> >
> >
>
>
>
>
>______________________________________________
>LLama Gratis a cualquier PC del Mundo.
>Llamadas a fijos y m?viles desde 1 c?ntimo por minuto.
>http://es.voice.yahoo.com
>
>
>
>------------------------------
>
>Message: 3
>Date: Sun, 25 Jun 2006 10:55:00 +0200
>From: "Bayani Carbone" <[hidden email]>
>Subject: [ns] 3G/802.11 node
>To: <[hidden email]>
>Message-ID: <001001c69835$0a9e1a20$6e86a8c0@rockets>
>Content-Type: text/plain; charset="iso-8859-1"
>
>Hi, I would like some advice on how to go about creating a node which as
>both 3G(mobile station) and 802.11 capabilities. I'm using the UMTS
>implementation of the University of Rome. Data received on one interface
>should be able to be forwarded to the other. Any suggestions are welcome.
>
>Thank you,
>
>Bayani Carbone
>
>
>------------------------------
>
>Message: 4
>Date: Sun, 25 Jun 2006 11:33:06 +0200
>From: "Andrea M" <[hidden email]>
>Subject: Re: [ns] setting the radio and sensing ranges of a sensor
> node
>To: "Miguel Sepulcre" <[hidden email]>
>Cc: [hidden email]
>Message-ID:
> <[hidden email]>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>Hi, if you want to set the radius of a node look also at this:
>http://mailman.isi.edu/pipermail/ns-users/2001-June/015908.html
>
>bye
>
>
>2006/6/25, Miguel Sepulcre <[hidden email]>:
> >
> >
> > The basic procedure to 'set' the communication range is detailed in the
>ns
> > manual: http://www.isi.edu/nsnam/ns/doc/node221.html (an example can be
> > found here http://140.116.72.80/~smallko/ns2/range_en.htm).
> >
> > The sensing range can be similarly adjusted with:
> > Phy/WirelessPhy set CSThresh_ <value>Hope this helps
> >
> > Regards
> >
> > Miguel
> >
> >
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Alper BEREKETLI" <[hidden email]>
> > To: <[hidden email]>
> > Sent: Saturday, June 24, 2006 5:15 PM
> > Subject: [ns] setting the radio and sensing ranges of a sensor node
> >
> >
> > >
> > > Hi all,
> > >
> > > I am performing some simulations on wireless sensor networks and would
> > > like to know how I can set and use the "radio communication" and
> > > "sensing" ranges of a sensor node... Where can I find the sensing
> > > range of a wireless node so that I can calculate the coverage of an
> > > event region?
> > >
> > > I would appreciate any help. Thanks in advance.
> > >
> > >
> > > Alper BEREKETLI
> > > Research & Teaching Assistant
> > > Middle East Technical University
> > > Department of Electrical and Electronics Engineering
> > > E-Mail: [hidden email], [hidden email]
> > > Office: EA404, Phone: (+90 312) 210 44 25
> > > Lab: D123, Phone: (+90 312) 210 45 74
> > >
> > >
> >
> >
> >
> >
> > ______________________________________________
> > LLama Gratis a cualquier PC del Mundo.
> > Llamadas a fijos y m?viles desde 1 c?ntimo por minuto.
> > http://es.voice.yahoo.com
> >
> >
>
>
>------------------------------
>
>Message: 5
>Date: Sun, 25 Jun 2006 08:34:34 -0400
>From: "Jeff Schwentner" <[hidden email]>
>Subject: [ns] GEA w/ ns_2.29-2 Build Problems
>To: <[hidden email]>
>Message-ID: <000301c69853$b75caf10$6601a8c0@cobra>
>Content-Type: text/plain; charset="us-ascii"
>
>I downloaded ns_2.29-2.tar.gz (from
>http://bode.cs.uni-magdeburg.de/~aherms/debian/dists/sid/ns2/source/) and
>ran "./configure --enable-debug".
>
>
>
>The last few lines when I do a "make" are:
>
>
>
>tcp/tcp.cc: In member function `virtual void
>
>TcpAgent::processQuickStart(Packet*)':
>
>tcp/tcp.cc:1635: warning: converting to `int' from `double'
>
>make: *** [tcp/tcp.o] Error 1
>
>
>
>Does anyone know what this problem is?  I am really only interested in
>building and using GEA with ns-2.
>
>
>
>Thanks,
>
>
>Jeff
>
>
>
>
>
>------------------------------
>
>Message: 6
>Date: Sun, 25 Jun 2006 16:21:32 +0200
>From: "Wasiq Nadeem" <[hidden email]>
>Subject: [ns] ns-allinone-2.1b9a - error in ./configure: line 5718 -
> tcl8.3.2 configuration failed...
>To: "NS User Group" <[hidden email]>
>Message-ID: <[hidden email]>
>Content-Type: text/plain; charset="iso-8859-1"
>
>Hello All,
>
>During the ./install command for ns-allinone-2.1b9a , I received the
>following error:
>
>checking for connect... yes
>checking for gethostbyname... yes
>checking if 64bit support is requested... no
>checking if 64bit Sparc VIS support is requested... no
>checking system version (for dynamic loading)... ./configure: line 5718:
>syntax error near unexpected token `)'
>/configure: line 5718: `       OSF*)'
>tcl8.3.2 configuration failed! Exiting ...
>Tcl is not part of the ns project.  Please see www.Scriptics.com
>to see if they have a fix for your platform.
>
>Any ideas on how this can be fixed? In case there are doubts, yes I am new
>to NS-2! :-)
>
>Cheers,
>
>Wasiq
>
>------------------------------
>
>Message: 7
>Date: Sat, 24 Jun 2006 21:19:49 -0400
>From: "Mohammad Zubair Ahmad" <[hidden email]>
>Subject: [ns] Changing node configurations for wireless networks.
>To: "NS USERS" <[hidden email]>
>Message-ID:
> <[hidden email]>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>Hi everyone,
>
>Could anyone help me out in adding an additional characteristic while
>configuring the node with its various characteristics like routing protocol
>etc. I need to add an additional parameter into the node configuration (as
>shown below) and need to know how to make the changes in c++. Or atleast
>could anyone enlighten me as to which files are handling the current node
>configurations.
>
>What i need to actually do is:
>
>\$ns_ node-config -addressType hierarchical
>                    -adhocRouting AODV
>                    -llType LL
>                    -macType Mac/802_11 \bs
>
>                    -ifqType Queue/DropTail/PriQueue
>                    -ifqLen 50
>                    -antType Antenna/OmniAntenna
>                    -propType Propagation/TwoRayGround
>                    -phyType Phy/WirelessPhy
>
>
>                    -topologyInstance \$topo
>                    -channel Channel/WirelessChannel
>                    -agentTrace ON
>                    -routerTrace ON
>                    -macTrace OFF
>
>
>                    -movementTrace OFF
>                    -myParameter myValue
>      // Need to add this to each node I configure
>
>
>
>I have found through the mailing list archives different techniques as to
>configure different nodes differently - for example a few nodes with AODV
>as
>rp or DSR etc .. or something similar. I want to add another parameter to
>the node configuration to ultimately declare nodes with both my
>configuration and some with the standard configuration. Any help in this
>regard will be appreciated.
>
>Thanks in advance,
>Zubair
>
>PS: I apologize if multiple copies are posted .. my connection started
>acting up at the wrong time. :) Thanks ..
>
>--
>Mohammad Zubair Ahmad
>PhD Student, Computer Engineering
>University of Central Florida,
>Orlando, FL 32826
>Cell:(407)-435-9070
>
>
>------------------------------
>
>_______________________________________________
>Ns-users mailing list
>[hidden email]
>http://mailman.isi.edu/mailman/listinfo/ns-users
>
>
>End of Ns-users Digest, Vol 30, Issue 26
>****************************************


Loading...